Search found 440 matches

by joro
27 Jan 2024, 20:40
Forum: General
Topic: More correction files for coupler
Replies: 7
Views: 7182

Re: More correction files for coupler

Yes, create separate correction files for each component, and then apply them successively to account for specific corrections. This way, you can address the unique characteristics of each RF component without combining them into one overall correction file. It is only possible to correct cables wi...
by joro
10 Jul 2023, 16:00
Forum: News / Events
Topic: New version: RadiMation version 2023.1.7
Replies: 0
Views: 4537

New version: RadiMation version 2023.1.7

We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2023.1.6 version. This version 2023.1.7 has been validated by our internal software quality checks. We strongly advise to test a...
by joro
29 Jun 2023, 14:06
Forum: General
Topic: exporting the wrong curve
Replies: 1
Views: 4330

Re: exporting the wrong curve

Both curves are correct, and show the same data. There is only a small difference in how the data is being shown. The exported curve draws each and every data sample of the curve, and that is why a variation in the signal is seen between 1.5 and 2.5 MHz. It thus shows all higher and lower measuremen...
by joro
22 May 2023, 16:51
Forum: Ideas / Suggestions
Topic: Integration of Temperature/Pressure/Humidity Sensors
Replies: 3
Views: 8704

Re: Integration of Temperature/Pressure/Humidity Sensors

I recently described that we are working on a possibility to automatically update the 'temperature', 'humidity', 'pressure' and 'mode of operation' of a test. I can inform you, that this feature is now available, and can be used with the latest RadiMation device drivers, and a custom 'EUT Controller...
by joro
02 May 2023, 08:27
Forum: Ideas / Suggestions
Topic: Integration of Temperature/Pressure/Humidity Sensors
Replies: 3
Views: 8704

Re: Integration of Temperature/Pressure/Humidity Sensors

At present, the only way to ensure that the correct ambient information is entered during test startup is for the operator to do it manually. However, we are actively working on automating this process to eliminate the need for manual input. Our plan is to develop a Python script that can run in the...
by joro
07 Feb 2022, 12:35
Forum: Report Generator
Topic: How can I include used equipment in a report
Replies: 3
Views: 5195

Re: How can I include used equipment in a report

It is not possible at this moment to combine the list of equipment from multiple tests into a single table. Putting multiple separate tables (one for each test) under each other is sadly the best what we can suggest at this moment. I do understand your request, and I agree that it would be a benefit...
by joro
03 Feb 2022, 17:55
Forum: Immunity
Topic: How can I perform magnetic field test for MIL-STD RS101
Replies: 4
Views: 10740

Re: How can I perform magnetic field test for MIL-STD RS101

We have created two different application notes that explain how the magnetic field tests can be performed in RadiMation. It primarily contains the same information as shown, above but contains some more details and explanations regarding the equipment setup that has to be used. The links are: * App...
by joro
26 Jan 2022, 11:31
Forum: News / Events
Topic: New Version: RadiMation version 2021.3.3
Replies: 0
Views: 2462

New Version: RadiMation version 2021.3.3

We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2021.2.7 version. This version 2021.3.3 has been validated by our internal software quality checks. We strongly advise to test a...
by joro
07 Jan 2022, 08:56
Forum: Immunity
Topic: radiated immunity Multiband
Replies: 3
Views: 4676

Re: radiated immunity Multiband

Hello emvlab, It is indeed correct that by default the horizontal field graph and the vertical field graph are using the same color. It indeed are two lines that are using the same name, and because of the same name they also use the same color. In RadiMation the customization of the graph line (lik...
by joro
04 Jan 2022, 16:33
Forum: Emission
Topic: Other frequencies than expected are selected during the initial prescan
Replies: 1
Views: 4439

Re: Other frequencies than expected are selected during the initial prescan

The temporary selection of these frequency ranges is indeed happening, and there is a very logical explanation for it. Using the band configuration that you described, the following actions are performed: The first band is being measured on the analyser for the frequency range from 150 kHz to 1 MHz....
by joro
16 Dec 2021, 12:30
Forum: Forum
Topic: Switch between time and frequency diagram as a standard diagram
Replies: 2
Views: 4285

Re: Switch between time and frequency diagram as a standard diagram

Which RadiMation version are you using?
It could be that this indeed was a problem in the 2021.1.x version of RadiMation. It should be resolved in the 2021.2.x version of RadiMation. In the 2021.2.x versions, the frequency diagram should be the default again.
by joro
16 Dec 2021, 09:55
Forum: General
Topic: Log4J vulnerability
Replies: 1
Views: 5106

Re: Log4J vulnerability

I can be brief in this answer: RadiMation is NOT using Log4J, and is thus not affected by those problems at all.

RadiMation never used Log4J in the current and previous versions, and is also not planning to start using Log4J.
by joro
23 Nov 2021, 10:42
Forum: Device drivers
Topic: Possible to use NI GPIB-ENET/1000 - GPIB-Controller for Gigabit Ethernet/LAN?
Replies: 1
Views: 5697

Re: Possible to use NI GPIB-ENET/1000 - GPIB-Controller for Gigabit Ethernet/LAN?

The interface you are referring to is the National Instruments (NI) GPIB-ENET/1000. That device is indeed fully supported by the NI-MAX software and also by the NI-VISA software library. Because RadiMation is using the NI-VISA software library, it will also be able to use the GPIB-ENET/1000 in RadiM...
by joro
23 Nov 2021, 09:51
Forum: Device drivers
Topic: Device driver for Microwave analyzer Keysight Fieldfox 9916B
Replies: 1
Views: 4291

Re: Device driver for Microwave analyzer Keysight Fieldfox 9916B

Hi Henk,

We will discuss directly by e-mail, on what is possible.

Best regards,
John
by joro
10 Nov 2021, 14:52
Forum: Emission
Topic: Radiated Emission with Gauss TDEMI X6, "realtime scanning"
Replies: 2
Views: 5198

Re: Radiated Emission with Gauss TDEMI X6, "realtime scanning"

Hello tha-paul, Our RadiMation software is not using the 'realtime spectrogram mode' of the Gauss TDEMI, because our 'turn turntable during measurement' algorithm is using the additional information that is received by taking individual sweeps to optimize the turntable angle optimization. It is thus...
by joro
07 May 2021, 11:40
Forum: FAQ
Topic: The definition of measured field, voltage and current
Replies: 2
Views: 14105

Re: The definition of measured field, voltage and current

In addition to previous explanation, there is one important remark regarding the display of the power graphs. As explained in the previous post, the values that are shown in the field, voltage and current graphs are corrected for the modulation and the conservation. However, this is NOT done for the...
by joro
04 Mar 2021, 17:19
Forum: Emission
Topic: How to apply correction of van Veen loop?
Replies: 1
Views: 3108

Re: How to apply correction of van Veen loop?

It is indeed correct that in the documentation of the Laplace RF300 (https://www.laplace.co.uk/wp-content/uploads/2019/10/RF300-MANUAL.pdf ) is written that the antenna factor should be applied when measurements are performed with the antenna for the CISPR16 measurements. We suggest to use the condu...
by joro
26 Feb 2021, 12:29
Forum: News / Events
Topic: New Version: RadiMation version 2020.2.8
Replies: 0
Views: 3004

New Version: RadiMation version 2020.2.8

We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2020.2.7 version. This version 2020.2.8 has been validated by our internal software quality checks. We strongly advise to test a...
by joro
20 Jan 2021, 21:53
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5315

Re: wrong display above 1 GHz

It is indeed possible that no error situation is triggered, and thus the 'Error dialog' is not shown. In that case we advice, to just perform the test in the new software version, and then at the end of the test select the 'Help' menu, and then select the 'Report' or 'Report Error' option. It will a...
by joro
19 Jan 2021, 22:25
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5315

Re: wrong display above 1 GHz

Please see the page on our RadiWiki website that explains how an Error Report can be created and transmitted: https://wiki.radimation.com/wiki/index.php/Error_Report