Search found 235 matches

by incognito
04 Jan 2022, 16:21
Forum: Emission
Topic: Other frequencies than expected are selected during the initial prescan
Replies: 1
Views: 4439

Other frequencies than expected are selected during the initial prescan

Hi, We have configured a multiband emission test, that is using 3 bands: 150 kHz - 1 MHz 1 MHz - 5 MHz 5 MHz - 30 MHz When this test is performed, we however also see that other frequency ranges are selected on the analyser. And these ranges do not seem to be measured. We for example see these frequ...
by incognito
16 Dec 2021, 09:54
Forum: General
Topic: Log4J vulnerability
Replies: 1
Views: 5106

Log4J vulnerability

Hi, There currently seems to be an issue with the Log4J application (which I also found out by using google: Log4Shell: critical vulnerability in Apache Log4j ) and our IT department is giving this topic a very high priority and is going through ALL software that is being used in our company. Is Rad...
by incognito
23 Nov 2021, 09:55
Forum: Device drivers
Topic: Possible to use NI GPIB-ENET/1000 - GPIB-Controller for Gigabit Ethernet/LAN?
Replies: 1
Views: 5698

Possible to use NI GPIB-ENET/1000 - GPIB-Controller for Gigabit Ethernet/LAN?

We are very often deal with problems, being related to the GPIB-Fiberoptic transceivers from NI (140F). As soon they get older, they seem to generate random problems in the communication….. Replacing one side generally solves the issue but only for the next 2-3 years. We now are looking to find some...
by incognito
04 Mar 2021, 16:56
Forum: Emission
Topic: How to apply correction of van Veen loop?
Replies: 1
Views: 3109

How to apply correction of van Veen loop?

I perform a van veen loop measurement as it is described at: https://forum.radimation.com/viewtopic.php?f=6&t=68 I'm using the Laplace instruments RF300 loop antenna. https://www.laplace.co.uk/systems/magnetic-field/rf300-van-veen-loop/ That is working ok, but I do have some doubts on the best metho...
by incognito
21 Sep 2020, 11:28
Forum: Immunity
Topic: Is it required to correct for the 6 dB attenuator in the CI calibration?
Replies: 1
Views: 2678

Is it required to correct for the 6 dB attenuator in the CI calibration?

We are performing a Conducted Immunity calibration according 61000-4-6.
We included a 6 dB attenuator between the amplifier and the injection device.

The question is if I have to add this into Radimation.
There is no calculation anywhere as this is in the injection part, right?
by incognito
17 Jul 2020, 08:32
Forum: Immunity
Topic: What is the easiest way to correct multiple cables between the powermeter and the calibration jig?
Replies: 1
Views: 2655

What is the easiest way to correct multiple cables between the powermeter and the calibration jig?

In our calibration setup for the Conducted immunity IEC 61000-4-6, we have multiple cables between the calibration jig and the analyzer that we are using to measure the injected voltage level. At present I am having to combine all 5 transduced factors into one for the “Power Correction” when using t...
by incognito
30 Jun 2020, 10:34
Forum: Report Generator
Topic: Why is ||RADIMATION VERSION|| not replaced with the correct version of RadiMation?
Replies: 1
Views: 2767

Why is ||RADIMATION VERSION|| not replaced with the correct version of RadiMation?

I am using the ||RADIMATION VERSION|| report generator code, to include the version number of RadiMation that I am using to generate the report into the final report. However when I am using version 2020.0.11, the ||RADIMATION VERSION|| code is always replaced by 2019.2.5. Why is ||RADIMATION VERSIO...
by incognito
12 Jun 2020, 13:47
Forum: Emission
Topic: Controlling the Schwarzbeck LISN NSLK 8128 through the R&S ESU8
Replies: 1
Views: 2626

Controlling the Schwarzbeck LISN NSLK 8128 through the R&S ESU8

I want to control the Schwarzbeck LISN NSLK 8128 and I guess that a direct remote control with RadiMation is not possible. I just found a description for remote control via measurement receiver ESU 8 (Rohde & Schwarz). Is there any option to implement the LISN in combination with the ESU 8 controlle...
by incognito
25 May 2020, 16:37
Forum: Emission
Topic: How can measurements for multiple similar standards be done only once?
Replies: 1
Views: 2476

How can measurements for multiple similar standards be done only once?

The limits for industrial IEC 61000-6-4 are similar to FCC part 15. For ISM we use for CE EN55011 group 1 and> 20 kV and for FCC part 18. Of this the limit for CE is a few dB lower than for FCC part 18. We are using very big EUT's and we do not do a height scan and place the antenna at a distance of...
by incognito
25 May 2020, 15:39
Forum: Immunity
Topic: Why is there a difference in the variation of the same graph in Frequency/Time graphs?
Replies: 1
Views: 2617

Why is there a difference in the variation of the same graph in Frequency/Time graphs?

I'm using the Multiband radiated immunity test to perform a test. Graphs for the 'Electrical Field Substitution method' are available in the graph on the 'Frequency' tab, and also as a graph in the 'Time' Graph. See the screenshot: FrequencyTimeGraph.png There is however a difference between the gra...
by incognito
25 May 2020, 14:02
Forum: Report Generator
Topic: How to include only the average plot in a report?
Replies: 3
Views: 4061

Re: How to include only the average plot in a report?

Thank you for your answer. I could separate the graphs with the described procedure. But now the markers for quasi peak and average final measurements are missing in the plots. I have no idea how to name these markers in the template.
by incognito
25 May 2020, 13:46
Forum: Report Generator
Topic: How to include only the average plot in a report?
Replies: 3
Views: 4061

How to include only the average plot in a report?

I have a question regarding templates for an emission test. I tried to generate a template for an emission test, but I could not figure out how to
separate the peak/quasi-peak and the average plot.
by incognito
18 May 2020, 16:42
Forum: Emission
Topic: Why can't the sweeptime be modified?
Replies: 1
Views: 3068

Why can't the sweeptime be modified?

I have a question. Why is it not possible to change the sweep time to other values or auto? See attachment.
Is it possible to change that so I can do some tests with other values for sweep time?
Dare SW settings.jpg
Dare SW settings.jpg (93.21 KiB) Viewed 3068 times
by incognito
24 Apr 2020, 16:22
Forum: General
Topic: Copying the configuration of the graph line colors to another PC
Replies: 2
Views: 5329

Copying the configuration of the graph line colors to another PC

Hi, We have a few PC's in our EMC lab. On one of the PC's the colors for the graphlines, is as we would like to have them also on the other PC's. We customized the colors of the graph lines on that PC by using the 'Graphs' > 'Customize...' option. Is there a possibility to copy those graph colors al...
by incognito
20 Apr 2020, 14:48
Forum: General
Topic: How do you prevent that a computer virus is present in RadiMation?
Replies: 2
Views: 4852

How do you prevent that a computer virus is present in RadiMation?

I am worried that the RadiMation software contains a computer virus. Can you explain what you do to prevent that a computer virus is present in RadiMation?
by incognito
10 Oct 2019, 14:10
Forum: Immunity
Topic: Is it possible to measure 600 V/m with an Amplifier Research FM5004?
Replies: 1
Views: 4464

Is it possible to measure 600 V/m with an Amplifier Research FM5004?

Hi, I have a question about radiated immunity. We are trying to achieve 600V/M levels but the software restricts the (Field Monitor) FM 5004 from going past 300V/M. There are four ranges: auto range, range 2, range 3 and range 4. Range four only goes to 300V/M. There are no other ranges we can selec...
by incognito
05 Mar 2019, 12:09
Forum: Immunity
Topic: How to perform a closed loop method test accoording ISO 11452-4
Replies: 1
Views: 4199

How to perform a closed loop method test accoording ISO 11452-4

How can I perform a test accoording the ISO 11452-4, and then specifically the closed loop method with power limitation test?
by incognito
11 Oct 2018, 14:40
Forum: FAQ
Topic: Does RadiMation work on Windows 10?
Replies: 3
Views: 11222

Re: Does RadiMation work on Windows 10?

Is Windows 10 Home edition also supported and working?
by incognito
25 Jul 2017, 11:35
Forum: General
Topic: What is: 'New user interface for sequence testing'?
Replies: 1
Views: 4345

What is: 'New user interface for sequence testing'?

In the Release notes of RadiMation version 2017.1, I see a mention of: "New User Interface for Sequence Testing".
What is that, and what has been improved?
by incognito
17 Mar 2017, 14:26
Forum: Emission
Topic: Export an emission graph to Excel?
Replies: 1
Views: 3817

Export an emission graph to Excel?

Is it possible to export the measurement results of an emission graph to an Excel file?