Search found 236 matches
- 19 Jul 2024, 14:48
- Forum: Immunity
- Topic: Possible to use 4 probes during field calibration?
- Replies: 1
- Views: 2435
Possible to use 4 probes during field calibration?
Is it possible to setup a routine for the electric field calibration method with 4 probes for field uniformity test?
- 04 Jan 2022, 16:21
- Forum: Emission
- Topic: Other frequencies than expected are selected during the initial prescan
- Replies: 1
- Views: 7486
Other frequencies than expected are selected during the initial prescan
Hi, We have configured a multiband emission test, that is using 3 bands: 150 kHz - 1 MHz 1 MHz - 5 MHz 5 MHz - 30 MHz When this test is performed, we however also see that other frequency ranges are selected on the analyser. And these ranges do not seem to be measured. We for example see these frequ...
- 16 Dec 2021, 09:54
- Forum: General
- Topic: Log4J vulnerability
- Replies: 1
- Views: 8177
Log4J vulnerability
Hi, There currently seems to be an issue with the Log4J application (which I also found out by using google: Log4Shell: critical vulnerability in Apache Log4j ) and our IT department is giving this topic a very high priority and is going through ALL software that is being used in our company. Is Rad...
- 23 Nov 2021, 09:55
- Forum: Device drivers
- Topic: Possible to use NI GPIB-ENET/1000 - GPIB-Controller for Gigabit Ethernet/LAN?
- Replies: 1
- Views: 8325
Possible to use NI GPIB-ENET/1000 - GPIB-Controller for Gigabit Ethernet/LAN?
We are very often deal with problems, being related to the GPIB-Fiberoptic transceivers from NI (140F). As soon they get older, they seem to generate random problems in the communication….. Replacing one side generally solves the issue but only for the next 2-3 years. We now are looking to find some...
- 04 Mar 2021, 16:56
- Forum: Emission
- Topic: How to apply correction of van Veen loop?
- Replies: 1
- Views: 5316
How to apply correction of van Veen loop?
I perform a van veen loop measurement as it is described at: https://forum.radimation.com/viewtopic.php?f=6&t=68 I'm using the Laplace instruments RF300 loop antenna. https://www.laplace.co.uk/systems/magnetic-field/rf300-van-veen-loop/ That is working ok, but I do have some doubts on the best metho...
- 21 Sep 2020, 11:28
- Forum: Immunity
- Topic: Is it required to correct for the 6 dB attenuator in the CI calibration?
- Replies: 1
- Views: 4560
Is it required to correct for the 6 dB attenuator in the CI calibration?
We are performing a Conducted Immunity calibration according 61000-4-6.
We included a 6 dB attenuator between the amplifier and the injection device.
The question is if I have to add this into Radimation.
There is no calculation anywhere as this is in the injection part, right?
We included a 6 dB attenuator between the amplifier and the injection device.
The question is if I have to add this into Radimation.
There is no calculation anywhere as this is in the injection part, right?
- 17 Jul 2020, 08:32
- Forum: Immunity
- Topic: What is the easiest way to correct multiple cables between the powermeter and the calibration jig?
- Replies: 1
- Views: 4598
What is the easiest way to correct multiple cables between the powermeter and the calibration jig?
In our calibration setup for the Conducted immunity IEC 61000-4-6, we have multiple cables between the calibration jig and the analyzer that we are using to measure the injected voltage level. At present I am having to combine all 5 transduced factors into one for the “Power Correction” when using t...
- 30 Jun 2020, 10:34
- Forum: Report Generator
- Topic: Why is ||RADIMATION VERSION|| not replaced with the correct version of RadiMation?
- Replies: 1
- Views: 4662
Why is ||RADIMATION VERSION|| not replaced with the correct version of RadiMation?
I am using the ||RADIMATION VERSION|| report generator code, to include the version number of RadiMation that I am using to generate the report into the final report. However when I am using version 2020.0.11, the ||RADIMATION VERSION|| code is always replaced by 2019.2.5. Why is ||RADIMATION VERSIO...
- 12 Jun 2020, 13:47
- Forum: Emission
- Topic: Controlling the Schwarzbeck LISN NSLK 8128 through the R&S ESU8
- Replies: 1
- Views: 4632
Controlling the Schwarzbeck LISN NSLK 8128 through the R&S ESU8
I want to control the Schwarzbeck LISN NSLK 8128 and I guess that a direct remote control with RadiMation is not possible. I just found a description for remote control via measurement receiver ESU 8 (Rohde & Schwarz). Is there any option to implement the LISN in combination with the ESU 8 controlle...
- 25 May 2020, 16:37
- Forum: Emission
- Topic: How can measurements for multiple similar standards be done only once?
- Replies: 1
- Views: 4461
How can measurements for multiple similar standards be done only once?
The limits for industrial IEC 61000-6-4 are similar to FCC part 15. For ISM we use for CE EN55011 group 1 and> 20 kV and for FCC part 18. Of this the limit for CE is a few dB lower than for FCC part 18. We are using very big EUT's and we do not do a height scan and place the antenna at a distance of...
- 25 May 2020, 15:39
- Forum: Immunity
- Topic: Why is there a difference in the variation of the same graph in Frequency/Time graphs?
- Replies: 1
- Views: 4493
Why is there a difference in the variation of the same graph in Frequency/Time graphs?
I'm using the Multiband radiated immunity test to perform a test. Graphs for the 'Electrical Field Substitution method' are available in the graph on the 'Frequency' tab, and also as a graph in the 'Time' Graph. See the screenshot: FrequencyTimeGraph.png There is however a difference between the gra...
- 25 May 2020, 14:02
- Forum: Report Generator
- Topic: How to include only the average plot in a report?
- Replies: 3
- Views: 6595
Re: How to include only the average plot in a report?
Thank you for your answer. I could separate the graphs with the described procedure. But now the markers for quasi peak and average final measurements are missing in the plots. I have no idea how to name these markers in the template.
- 25 May 2020, 13:46
- Forum: Report Generator
- Topic: How to include only the average plot in a report?
- Replies: 3
- Views: 6595
How to include only the average plot in a report?
I have a question regarding templates for an emission test. I tried to generate a template for an emission test, but I could not figure out how to
separate the peak/quasi-peak and the average plot.
separate the peak/quasi-peak and the average plot.
- 18 May 2020, 16:42
- Forum: Emission
- Topic: Why can't the sweeptime be modified?
- Replies: 1
- Views: 5122
Why can't the sweeptime be modified?
I have a question. Why is it not possible to change the sweep time to other values or auto? See attachment.
Is it possible to change that so I can do some tests with other values for sweep time?
Is it possible to change that so I can do some tests with other values for sweep time?
- 24 Apr 2020, 16:22
- Forum: General
- Topic: Copying the configuration of the graph line colors to another PC
- Replies: 2
- Views: 7447
Copying the configuration of the graph line colors to another PC
Hi, We have a few PC's in our EMC lab. On one of the PC's the colors for the graphlines, is as we would like to have them also on the other PC's. We customized the colors of the graph lines on that PC by using the 'Graphs' > 'Customize...' option. Is there a possibility to copy those graph colors al...
- 20 Apr 2020, 14:48
- Forum: General
- Topic: How do you prevent that a computer virus is present in RadiMation?
- Replies: 2
- Views: 8060
How do you prevent that a computer virus is present in RadiMation?
I am worried that the RadiMation software contains a computer virus. Can you explain what you do to prevent that a computer virus is present in RadiMation?
- 10 Oct 2019, 14:10
- Forum: Immunity
- Topic: Is it possible to measure 600 V/m with an Amplifier Research FM5004?
- Replies: 1
- Views: 6425
Is it possible to measure 600 V/m with an Amplifier Research FM5004?
Hi, I have a question about radiated immunity. We are trying to achieve 600V/M levels but the software restricts the (Field Monitor) FM 5004 from going past 300V/M. There are four ranges: auto range, range 2, range 3 and range 4. Range four only goes to 300V/M. There are no other ranges we can selec...
- 05 Mar 2019, 12:09
- Forum: Immunity
- Topic: How to perform a closed loop method test accoording ISO 11452-4
- Replies: 1
- Views: 6159
How to perform a closed loop method test accoording ISO 11452-4
How can I perform a test accoording the ISO 11452-4, and then specifically the closed loop method with power limitation test?
- 11 Oct 2018, 14:40
- Forum: FAQ
- Topic: Does RadiMation work on Windows 10?
- Replies: 3
- Views: 14478
Re: Does RadiMation work on Windows 10?
Is Windows 10 Home edition also supported and working?
- 25 Jul 2017, 11:35
- Forum: General
- Topic: What is: 'New user interface for sequence testing'?
- Replies: 1
- Views: 5181
What is: 'New user interface for sequence testing'?
In the Release notes of RadiMation version 2017.1, I see a mention of: "New User Interface for Sequence Testing".
What is that, and what has been improved?
What is that, and what has been improved?