Search found 46 matches

by solutionseeker
08 Sep 2017, 10:12
Forum: Immunity
Topic: How to use R&S UPV performing Audio Breakthrough measurement
Replies: 1
Views: 3555

How to use R&S UPV performing Audio Breakthrough measurement

Can you explain to me how I can use a R&S UPV performing Audio Breakthrough measurement during Immunity testing?
by solutionseeker
19 Jan 2017, 17:01
Forum: Immunity
Topic: When deleting all Monitoring input channels they return
Replies: 1
Views: 2366

When deleting all Monitoring input channels they return

When I deleting all the Monitoring input channels (including the default eight channels) they return after I re-open the EUT. Why?
by solutionseeker
08 Nov 2016, 16:17
Forum: Emission
Topic: Few sweeps - long sweep time or many sweeps - short time?
Replies: 3
Views: 6997

Few sweeps - long sweep time or many sweeps - short time?

Would it be better to do fewer sweeps but with slower sweep speeds? I'm wondering if it is better to do lots of fast sweeps, or a few slower ones. What do you think?
by solutionseeker
17 Dec 2015, 10:38
Forum: Immunity
Topic: How to check the amplifier saturation?
Replies: 8
Views: 22568

Re: How to check the amplifier saturation?

This new test feature is looking great! I was wondering if a warning is shown in the event log in case the forward power step is exceeding the lower or upper limit? This would make it easy to verify when the linearity is not within the specification at some point(s).
by solutionseeker
26 Feb 2015, 10:00
Forum: Emission
Topic: How to configure the PMM 90xx User Controlled LISN?
Replies: 5
Views: 13410

How to configure the PMM 90xx User Controlled LISN?

The 9030 (30MHz – 3GHz) does NOT have any user Port – it’s the 9010 and 9010F that have user Ports. Unfortunately, I don’t know how the setup the LISN PMM L3-32. It can be controlled by the 9010 / 9010F with the PMM Software, but how to control it with RadiMation? So I created a new PMM 9030 User Co...
by solutionseeker
20 Nov 2014, 15:58
Forum: Immunity
Topic: Prevent FWD power from exeeding the 1dB compression point
Replies: 1
Views: 5766

Prevent FWD power from exeeding the 1dB compression point

Is it possible stopping e.g. an immunity measurement (61000-4-3; 4-6) automatically when the forward output power is above the 1 dB compression line? How can I prevent this?(is this the check box “Amplifier Protection”.
by solutionseeker
02 Sep 2014, 13:58
Forum: Emission
Topic: Explain working of the detector settings
Replies: 1
Views: 4828

Explain working of the detector settings

Could you please explain to me how the setting regarding the Detectors are working, see the red marks in the screenshot.
What does the the first and second detector precisely mean?
RE detector settings.PNG
RE detector settings.PNG (5.76 KiB) Viewed 4828 times
by solutionseeker
05 Aug 2014, 16:38
Forum: Emission
Topic: Burst keywords are not replaced
Replies: 1
Views: 4444

Burst keywords are not replaced

It seems that some keywords are not exported after generating a report for a Radiated Emission Burst test. We are using the Radimation version 2014.1.15.
Please provide a way to fix this issue.
by solutionseeker
27 May 2014, 08:46
Forum: Device drivers
Topic: How to solve SRQ line errors
Replies: 1
Views: 5944

How to solve SRQ line errors

During start-up we got an error that a SRQ line was raised. How can be avoid this error being generated?
by solutionseeker
20 Mar 2014, 12:58
Forum: Immunity
Topic: Multiple modulation forms during Radiated Immunity test
Replies: 7
Views: 16716

Multiple modulation forms during Radiated Immunity test

We are wondering if it is possible to perform Radiated Immunity using two different types of modulations (AM and PM) in the same sweep.
With this setting we could save time during the test, because the leveling is performed only once.
by solutionseeker
24 Feb 2014, 15:00
Forum: General
Topic: How to obtain the info which Operator performed a test?
Replies: 2
Views: 4772

Re: How to obtain the info which Operator performed a test?

In the Singleband test there is a dedicated drop-down box where you can choose the engineer who performed the test.
This is probably a more flexible solution instead of taking into account the logged-in engineer.
by solutionseeker
15 Nov 2013, 16:50
Forum: Immunity
Topic: How to set Test level Limitation Multiply factor Multiband
Replies: 1
Views: 4397

How to set Test level Limitation Multiply factor Multiband

When we want to perform a Conducted Immunity Fixed Current test it is possible to make use of a Multiply factor for the Test level Limitation, as can be seen from the screenshot below. CI_SB_Fixed_Current_HowToSet_MultiplyFactor.png How can we set the configuration of this setting using the Multiban...
by solutionseeker
12 Sep 2013, 17:10
Forum: Report Generator
Topic: Do I need a template before using the report generator
Replies: 1
Views: 4238

Do I need a template before using the report generator

How can I make use of the report generator, as there are no report templates available by default.
by solutionseeker
12 Sep 2013, 17:10
Forum: Report Generator
Topic: Do I need a template before using the report generator
Replies: 1
Views: 8758

Do I need a template before using the report generator

How can I make use of the report generator, as there are no report templates available by default.
by solutionseeker
16 Aug 2013, 13:57
Forum: Immunity
Topic: How to add attenuators to a calibration?
Replies: 1
Views: 4676

How to add attenuators to a calibration?

We are using the RadiMation software version 2013.1.8. We wish to perform tests according to the EN 61000-4-6 standard, Conducted immunity test. Before starting the test, we must first perform a calibration. There are 10dB and 20dB attenuators placed at the input of the spectrum analyzer. How can I ...
by solutionseeker
14 Aug 2013, 09:39
Forum: Pulsed
Topic: Where to define Cables for the EFT testing
Replies: 1
Views: 25860

Where to define Cables for the EFT testing

Where can I define the Cables for the EFT testing? In the manual it states “in the EUT Window”, but where in the EUT window?
Adding Cables for EFT testing None selected.png
Adding Cables for EFT testing None selected.png (11.11 KiB) Viewed 25860 times
by solutionseeker
01 Aug 2013, 11:19
Forum: General
Topic: Pasting Correction data in COR is changing it all to 120000
Replies: 2
Views: 5066

Re: Pasting Correction data in COR is changing it all to 120

You are correct about this. The correction factors are indeed represented in Hz and I forgot that the default for the RadiMation software is set to MHz.
by solutionseeker
01 Aug 2013, 11:13
Forum: General
Topic: Pasting Correction data in COR is changing it all to 120000
Replies: 2
Views: 5066

Pasting Correction data in COR is changing it all to 120000

When I try to paste correction data to a new correction file for a new antenna we have, it appears to be pasting the correction factors correctly but the frequency is all the same. I have attached a screenshot showing you this issue. I thought this used to work for me in the past but for some reason...
by solutionseeker
26 Jul 2013, 11:21
Forum: Emission
Topic: Optimize Angle Settings and Optimize Height Settings
Replies: 1
Views: 5974

Optimize Angle Settings and Optimize Height Settings

Could someone please give an detailed explanation about the 'Optimize Angle Settings' and the 'Optimize Height Settings' in RadiMation?
Optimize Angle Settings.png
Optimize Angle Settings.png (21.17 KiB) Viewed 5974 times
by solutionseeker
23 Jul 2013, 09:44
Forum: Device drivers
Topic: Advanced Configuration settings GPIB
Replies: 1
Views: 5864

Advanced Configuration settings GPIB

It is possible in the advance configuration screen to configure some additional settings for GPIB communication.
What should these settings be?
DeviceDrivers_RSS1006A_Advanced_settings_GPIB_fieldprobe.png
DeviceDrivers_RSS1006A_Advanced_settings_GPIB_fieldprobe.png (17.9 KiB) Viewed 5864 times