Search found 18 matches

by emvlab
10 Jan 2022, 14:13
Forum: Immunity
Topic: radiated immunity Multiband
Replies: 3
Views: 4678

Re: radiated immunity Multiband

Hello John Thanks So far it works, I now have two curves with different colors. But now it is so that both curves are drawn at the same time. I would like to achieve the following: With horizontal only the horizontal graph should be drawn and with vertical only the vertical graph. So actually the sa...
by emvlab
07 Jan 2022, 11:42
Forum: Immunity
Topic: Amplifier Linearity - wrong scaling
Replies: 0
Views: 3944

Amplifier Linearity - wrong scaling

Hello I wanted to measure amplifier linearity with Radimation 2021.1.9 and found the following: The forward power step (5.1 dB) is plotted with the limits with the accepted power step (upper 7.1 dB and lower 3.1 dB). With version 2021.1.9 the graph is in the range of 30-40 dB. With Radimation versio...
by emvlab
05 Jan 2022, 14:47
Forum: Immunity
Topic: radiated immunity Multiband
Replies: 3
Views: 4678

radiated immunity Multiband

Hello I have installed Radimation 2021.1.9. I measure radiated immunity/multiband horizontally and vertically. Calibrated with Electrical Field substitution method. For monitoring I have implemented a field probe EP602 for monitoring at the test site. Now I want to display the curve of field strengt...
by emvlab
16 Feb 2021, 14:00
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5318

Re: wrong display above 1 GHz

have you found a solution?
thanks
by emvlab
25 Jan 2021, 15:30
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5318

Re: wrong display above 1 GHz

Hello, I have done the same measurement with same settings but diffrent Radimation versions. see attached.
by emvlab
20 Jan 2021, 13:46
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5318

Re: wrong display above 1 GHz

I think there is no error entry because it is not recognized as an error at all?
by emvlab
18 Jan 2021, 16:01
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5318

Re: wrong display above 1 GHz

Hi roge
How can I get the error report?
by emvlab
11 Jan 2021, 14:22
Forum: General
Topic: wrong display above 1 GHz
Replies: 7
Views: 5318

wrong display above 1 GHz

Hello We installed a new Radimation version 2020.1.8 and found that the display at radiated emission above 1 GHz is about 20 dB higher than with the old version 2019.2.5. The settings are exactly the same as well as the measurement setup. What could be the cause? See the two reports in the appendix....
by emvlab
07 Oct 2020, 15:52
Forum: Device drivers
Topic: Maturo Electic Antenna Stand
Replies: 4
Views: 3958

Re: Maturo Electic Antenna Stand

thanks it works!

regards emvlab.ch
by emvlab
07 Oct 2020, 12:31
Forum: Device drivers
Topic: Maturo Electic Antenna Stand
Replies: 4
Views: 3958

Re: Maturo Electic Antenna Stand

it's the maturo controller MCU (2017)
by emvlab
06 Oct 2020, 08:56
Forum: Device drivers
Topic: Maturo Electic Antenna Stand
Replies: 4
Views: 3958

Maturo Electic Antenna Stand

Hi
We have a Maturo Electic Antenna Stand with a fix high. From Radimation we only have to control the polarization. I can't find polarization switching in any driver. How do I proceed exactly?

Thanks emvlab
by emvlab
11 Sep 2020, 07:31
Forum: General
Topic: Problem with GPIB PCI Card
Replies: 5
Views: 4122

Re: Problem with GPIB PCI Card

Yes it works. I had to change the GPIB Interface ID GPIB1 to GPIB0.
thanks
by emvlab
10 Sep 2020, 14:29
Forum: General
Topic: Problem with GPIB PCI Card
Replies: 5
Views: 4122

Re: Problem with GPIB PCI Card

Hello
Radimation i had reinstalled without success. It worked with this version.
attatched is the log File.

thanks
by emvlab
10 Sep 2020, 13:34
Forum: General
Topic: Problem with GPIB PCI Card
Replies: 5
Views: 4122

Problem with GPIB PCI Card

Hello
Radimation can no longer address GPIB devices. I get the error information: xxx: GPIB-Board is not installed od configured incorrectly (GPIB:ENEB). With NIMax I can address and query all devices.
Radimation 2019.2.5, Device Driver 2019.10.28.1532, Windows 10

Any idea?
by emvlab
13 Aug 2020, 14:04
Forum: Emission
Topic: Controll ENV216 through ESU8
Replies: 7
Views: 4242

Re: Controll ENV216 through ESU8

now it works. Thanks for help.
by emvlab
22 Jul 2020, 09:29
Forum: Emission
Topic: Controll ENV216 through ESU8
Replies: 7
Views: 4242

Re: Controll ENV216 through ESU8

If I control the ESU8 with NI Max directly (via Ethernet), the switching works on the ENV216 e.g. L1 to N. The new PC has Windows 10 installed. I have attached the log file for a conducted emission with switching between L1 and N. Actually I should find texts like: "INP:LISN:TYPE ENV216" or "INP:LIS...
by emvlab
14 Jul 2020, 11:19
Forum: Emission
Topic: Controll ENV216 through ESU8
Replies: 7
Views: 4242

Re: Controll ENV216 through ESU8

2019.1.8
by emvlab
13 Jul 2020, 15:30
Forum: Emission
Topic: Controll ENV216 through ESU8
Replies: 7
Views: 4242

Controll ENV216 through ESU8

Hi, The switching between neutral and line on ENV216 is done by the ESU8 (Device Driver). We have installed Radimation version 2019.2.5 and now the switching does not work anymore. We are of the opinion that this has worked until now. In the meantime we have installed a new Computer and the ESU8 was...