Search found 440 matches
- 07 Oct 2020, 13:40
- Forum: Device drivers
- Topic: Maturo Electic Antenna Stand
- Replies: 4
- Views: 4175
Re: Maturo Electic Antenna Stand
It is possible to modify the RadiMation device driver of the Maturo MCU antenna tower controller to NOT perform any height changes. This is however at this moment only possible with an 'advanced' trick. Start RadiMation Go to Configuration > Configuration Select the device drivers tab Select the 'an...
- 06 Oct 2020, 15:50
- Forum: Device drivers
- Topic: Maturo Electic Antenna Stand
- Replies: 4
- Views: 4175
Re: Maturo Electic Antenna Stand
Hi emvlab, RadiMation is very often controlling the antenna tower through an antenna tower controller. That controller is the computer communication interface between the antenna tower itself and the PC. Often the antenna tower controller is connected to the real physical antenna tower through fiber...
- 21 Sep 2020, 11:29
- Forum: Immunity
- Topic: Is it required to correct for the 6 dB attenuator in the CI calibration?
- Replies: 1
- Views: 2855
Re: Is it required to correct for the 6 dB attenuator in the CI calibration?
It is theoretically correct to configure an attenuator and have RadiMation correct for the 6dB attenuation. However it is not necessary at all, because the same test setup is used during the calibration and the real subtitution test. The 6 dB attenuator is not used for the measurement of an actual v...
- 24 Jul 2020, 07:50
- Forum: Emission
- Topic: Controll ENV216 through ESU8
- Replies: 7
- Views: 4505
Re: Controll ENV216 through ESU8
In the 'Dok4.docx' file you included a screenshot of the device driver configuration of the R&S ESU8 receiver. That is ok, but that device driver is only controlling the 'emission measurement' part of the R&S ESU8. This device driver is is however not able to control the LISN. The control of the LIS...
- 17 Jul 2020, 09:01
- Forum: Immunity
- Topic: What is the easiest way to correct multiple cables between the powermeter and the calibration jig?
- Replies: 1
- Views: 2847
Re: What is the easiest way to correct multiple cables between the powermeter and the calibration jig?
It indeed can happen that a connection between two devices is not a single cable, but consists of multiple cables and attenuators. You describe that you are now manually calculating and creating a single correction file that contains the total of all the added individual attenuations of all the sepa...
- 17 Jul 2020, 08:34
- Forum: Emission
- Topic: Controll ENV216 through ESU8
- Replies: 7
- Views: 4505
Re: Controll ENV216 through ESU8
Have you already been able to resolve the problem with the control of the ENV216 from the ESU8?
We do like to hear the solution, as it can help other users in the future.
We do like to hear the solution, as it can help other users in the future.
- 14 Jul 2020, 15:27
- Forum: Emission
- Topic: Controll ENV216 through ESU8
- Replies: 7
- Views: 4505
Re: Controll ENV216 through ESU8
I investigated the problem that you reported. However no changes have been made in the device driver that controls the LISN that is connected to the R&S ESU8 for a few years. Also no other end-users have reported a problem related to what you describe. At this moment it thus is difficult to provide ...
- 14 Jul 2020, 10:54
- Forum: Emission
- Topic: Controll ENV216 through ESU8
- Replies: 7
- Views: 4505
Re: Controll ENV216 through ESU8
It should indeed be possible to control the ENV216 LISN that is connected to the R&S ESU8, by using a RadiMation device driver. At this moment I do not know why it is not working anymore in the 2019.2.5 version. I would expect that it working as you are expecting. We will have to investigate this is...
- 30 Jun 2020, 10:45
- Forum: Report Generator
- Topic: Why is ||RADIMATION VERSION|| not replaced with the correct version of RadiMation?
- Replies: 1
- Views: 2905
Re: Why is ||RADIMATION VERSION|| not replaced with the correct version of RadiMation?
It is correct that the ||RADIMATION VERSION|| code should normally be replaced with the version of RadiMation that is being used to generate the report. However when a test specific template is used, this code is raising some ambiquity. Each test also records the RadiMation version that is used to p...
- 26 Jun 2020, 11:11
- Forum: Emission
- Topic: Add Coupling and decoupling network driver
- Replies: 2
- Views: 2805
Re: Add Coupling and decoupling network driver
The configuration details of the 'Configurable LISN' are documented on the RadiWiki website at: https://wiki.radimation.com/wiki/index.php/Configurable_LISN For a simple LISN that is not automatically controlled it is not necessary to specify any command in any of the textboxes. For a simple (non-co...
- 25 Jun 2020, 07:49
- Forum: Emission
- Topic: Receiver settings stepsize and measure time are greyed out
- Replies: 2
- Views: 2639
Re: Receiver settings stepsize and measure time are greyed out
Also see https://forum.radimation.com/viewtopic.php?f=6&t=881 , which is a similar question referring to a greyed out VBW and sweep time.
- 25 Jun 2020, 07:47
- Forum: Immunity
- Topic: View changes over time for defined inputs
- Replies: 2
- Views: 2570
Re: View changes over time for defined inputs
Also see https://forum.radimation.com/viewtopic.php?f=5&t=883 for a very similar question, which also explains the difference between the frequency and time graph.
- 24 Jun 2020, 08:07
- Forum: Immunity
- Topic: Radiated Immunity with GTEM-Cell
- Replies: 1
- Views: 5412
Re: Radiated Immunity with GTEM-Cell
In the GTEM-Cell, the antenna distance is indeed not really required. It is however important to note and write down, what the actual septum height is at the location where the field probe is positioned during the calibration. The when a substitution is performed using the generated calibration file...
- 24 Jun 2020, 08:01
- Forum: Emission
- Topic: Radiated Emission GTEM
- Replies: 1
- Views: 5509
Re: Radiated Emission GTEM
The septum height input field should be filled with the height between the septum and the ground at the location where the EUT is placed. For the correct calculation of the measurement results, this should really be the height at the location of the EUT. It the same EUT is going to be positioned mor...
- 16 Jun 2020, 16:08
- Forum: News / Events
- Topic: New version: RadiMation version 2020.0.12
- Replies: 0
- Views: 3457
New version: RadiMation version 2020.0.12
We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2020.0.11 version. This version 2020.0.12 has been validated by our internal software quality checks. We strongly advise to test...
- 12 Jun 2020, 13:49
- Forum: Emission
- Topic: Controlling the Schwarzbeck LISN NSLK 8128 through the R&S ESU8
- Replies: 1
- Views: 2753
Re: Controlling the Schwarzbeck LISN NSLK 8128 through the R&S ESU8
We have a RadiMation device driver exactly for this. It is the 'Rohde & Schwarz ESU Controlled LISN' device driver, which is one of the LISN device drivers that are available in RadiMation. Please see the documentation of this device driver on our RadiWiki site: https://wiki.radimation.com/wiki/inde...
- 05 Jun 2020, 14:06
- Forum: Immunity
- Topic: Using a current sensor correction file
- Replies: 1
- Views: 2350
Re: Using a current sensor correction file
To be able to represent the actual current flowing through a current sensor, it is indeed important that a device specific calibration factor is linked to the current sensor device driver in RadiMation. The impedance (or resistance) of the current sensor is required in the correct calculation of the...
- 25 May 2020, 17:14
- Forum: Emission
- Topic: How can measurements for multiple similar standards be done only once?
- Replies: 1
- Views: 2623
Re: How can measurements for multiple similar standards be done only once?
With some small tips and tricks, it is indeed possible to do the measurements of these similar standards only once. It however does require that some manual interactions are needed, as it is not possible to do it fully automated according to all the standards. As a general description, the following...
- 25 May 2020, 15:50
- Forum: Immunity
- Topic: Why is there a difference in the variation of the same graph in Frequency/Time graphs?
- Replies: 1
- Views: 2785
Re: Why is there a difference in the variation of the same graph in Frequency/Time graphs?
It is indeed correct that there could be a difference in the variation in the graph of the same value between the time graph and the frequency graph. The frequency graph shows the value, based on a frequency index. For every unique frequency there is thus only a single value shown. The value that is...
- 25 May 2020, 14:14
- Forum: Report Generator
- Topic: How to include only the average plot in a report?
- Replies: 3
- Views: 4230
Re: How to include only the average plot in a report?
The markers for the final measurement of the average and the quasi peak detectors, are just normal graphs. However those graphs are not included in the graphline index above the graph. Within RadiMation the markers can be shown (or hidden) by clicking on the 'Graphs' button, and then select the 'Pea...