RadiMation forum

When RadiMation is slow when a certain amplifier is turned check the follow thing(s). * Is the amplifier in remote mode? Some amplifiers, in local mode, have the unwanted behaviour of being detectable on the GPIB bus, but not responding to any commands send to the device. This can cause a delay beca...

RadiMation® is slow when I turn on an amplifier

To capture Rs-232 communication there is a program called portmon. (available on: http://technet.microsoft.com/en-us/sysinternals/bb896644.aspx ) Portmon can monitor Rs-232 and LPT communication. Start the program before reproducing the problem Start the logging, it should do it automatically. Repro...

How can I capture Rs-232 communication?

RadiMation® uses drivers for all devices used during an EMC measurement, even passive components. With passive components this may seem an overkill, as nothing is being changed/controlled with the device. Frequency limitation is the main reason, if RadiMation® does not know the frequency range, it c...

How can I add drivers of uncontrolled hardware like LISN's?

RadiMation® has attenuation measurement build in. It consist of 2 phases, the system calibration and the eut calibration. The system the measurements are part of a calibration so the EUT window must be closed before you can access the feature. You can reach the system calibration by: Calibration Sys...

How can I determine the attenuation of a cable with RadiMation®

RadiMation® is supported on Windows 7. RadiMation® is working correctly on the 32-bit and on 64-bit version of Windows 7. Also on Windows 8.1 (32-bits and 64-bits) RadiMation® is fully working and supported.

Is Windows 7 (64 bit) supported?

To turn off the log in window of RadiMation, select an engineer that has no password selected. Log in as Administrator: 1.Go to Configuration --> Engineer 2.Select Administrator 3.press Edit, a new window will appear. 4.Press Change Password. 5.Fill in the old password (default: Radimation) 6.Do not...

How can I turn off the login window?

The default password for the administrator is: Radimation

What is the default RadiMation® password for the Administrator?

The password of the administrator cannot be cleared, it is however possible to remove the administrator account. If RadiMation® is started without an Administrator account, RadiMation® will automatically create a new Administrator account with the default RadiMation® password. Use the following step...

How can I reset the administrator password in RadiMation®?

There is no real pause inside multi band, but in general the only time you need a pause is when changing the test set up. For this you can use the before and after action in the test set up.

Is it possible to create a pause in a multi-band test ?

To overlap two graphs, open both the test results. In one of the two test results press the graphs button. you will see that the other test is available for selection. You can add any line from the other test result into the current graph.

How can I overlap two graphs in multi band?