RadiMation forum

a) Before doing an immunity test (CS or RS) a System Calibration file is calibrated. During the immunity test this System calibration file is used. After reviewing the results of the test, where can i find which System calibration file is used and of which date. Do i have to summit one or more field...

When performed a test, where can i find which device driver version is used in that test.
Is there also a keyword, like "Radimation version" for device driver version used.

I don't understand what the below mentioned curves represents: - "Current Substitution Method" - "Electrical Field Sunbstitution Method" - "Maximium Signal Generator Power" - "Maximum Signal generator Power Limit" and where to define this curve. Some times the names of the curves are (very) confusin...

When re-opening a performed multiband test for CE or RE the fields: VBW, Sweep Time and Measure Time are not visible in the Receiver Window. I understood in the past that this is problematic because of the different RBW, VBW and Sweep Time settings for each frequency range in a Multi-band measuremen...

Thanks, its working with this workaround.

What happens now: If i type-in a value of -60 dBm in the power level box it will be resetted to -40 dBm. Alle values lower then -40 dBm will be resetted to -40 dBm.
The setting of the "signal generator starting level"in the "measurements settings" tab is -70 dBm.

We performing a radiated emission test (1 sweep) from 100 - 160 MHz with a scan of 30s/MHz, so total time is 1800s. After finishing of the test we get a "time out" error of the spectrum analyser. In the mean time mouse and keyboard are not used during 30 min. and the laptop got into sleep during thi...

Performing a "Conducted Immunity, Fixed Current" with AM modulation, it looks that the "Conservation" option is not working. Could you verify this at DARE.

During a "Conducted Immunity; Fixed Power" test we want to set the RF level of the generator to -60 dBm. The lowest value to set = -40 dBm. We expect that this is within Radimation a fixed setting in the driver. Could you expand this to -60 dBm or -80 dBm. We use this test during calibration of the ...

During "System Calibration, Attenuation/Gain" three graphs are visible: Signal power, Received Power and Reference Attenuation. During "EUT Calibration, Attenuation/Gain" two graphs are visible: Signal power and EUT Attenuation. During EUT calibration, Attenuation/Gain we also want to see the graphs...

For ech test site you can define a "Before Action" and "After Action" actions. However for example, if you have divided you frequency range in different sub-frequency ranges and use the same test site in these sub-frequency ranges the "Before Action" and "After Action" actions won't be executed in t...

For calibration of RF components from 10 kHz - 2 GHz we use the RGN2006B generator (two separate generators from 9 kHz - 230 MHz and 230 MHz - 6 GHz) in combination with the switch RSW1022S. For the frequency range from 10 kHz - 2 GHz with have to divide the "System calibration" and "EUT calibration...

Have updated the latest device drivers. Re-started the computer. The problem still assists.

For the quantity E-field the unit dBµV has changed to dBŵV. First we have looked to the keyboard, region and language settings of Windows 10. They looked oke. It only appears on one laptop for already a few days. The other laptop is oke. We have re-installed Radimation version 2016.2.10 again, but ...

I did the things above mentioned for Radimation version 2016.2.10 and 2017.1.1, still there is a difference in reading of the power meter for the same signal at 100 MHz 0 dBm.

When starting up Radimation a Microsoft message occured on the screen. Normally we ignore this message and "Continue". Radimation starts normally up and we do the tests/measurements.
Question: is this a Radimation or Windows 10 problem? What to do about it.

Additional screen shots of two different settings of the "Carrier Frequency". Looking to the screenshots, there is a difference in the actual value reading.
Settings generator:
100 MHz, 0 dBm

When changing the "Carrier Frequency" field of the "Logging" menu the actual value of the non-corrected power meter changes. What is the function of this field? Is there somewhere a internal stored CF table in the power meter. Can you put it on and off. Is this something else then the "Correction Fa...

We want to make a screenshot of the analyser display. Is there an easy way to accomplish this. Way of work: The settings of the analyser and the final measurement is done manual at the analyser. When a nice picture is available we want to make a screenshot of the display by Radimation and save it as...

What is the difference between "conservation on power" or "conservation on voltage" during modulation. There is now a little confusion at NLR how the two functions work and when to use power conservation or voltage conservation. Normally at MIL-STD-461 and ED-14 the generator level at 100% AM SW is ...