RadiMation forum

What is the keyword for the "electric field substitution method testlevel" graph in a radiated immunity multiband test. We can't find the keyword in the documentation. When the keyword ||ALL GRAPHS|| is selected the line will be plotted.

Performimg Conducted Immunity > Fixed Voltage test. Test set-up with generator, amplifier and oscilloscope. Starting up test (iniatilisation) no problem. At first frequency point error "TDS3054B: No data or incorrect data was returned by the device" occurs. After cancel error and proceed test, same ...

At Calibration > System calibration > Conducted Susceptibility > Mil std calibration with Test-level: variable current and measuring device: oscilloscoop error on resistor driver 1 Ohm.
Error: 1 Ohm: Unknown GetValue ID.

The above mentioned process is very time-intensive way of calibration (using monitoring loop). According to MIL-STD-461 you only have to calibrate 110 dBpT@1 kHz. We want to do an other method of calibration and test: - Translate the limit level magnetic field curve (dBpT) to a current curve (dBuA)....

For the test "Radiated Immunity Fixed Power" there is no time stamp available in the table such as for "Radiated Immunity Multiband" tests.
It would be very nice to have this time information available so that our customer can synchronize his EUT data with our threat.

Want to perform an "Audio Frequency Conducted Susceptibility" Test according to MIL-461/DO-160. What is the best Conducted Immunity/Conducted Susceptibility environment (multiband, fixed voltage, ?) to set-up this test. We have to run a test according to a certain amplitude (voltage) versus frequenc...

During (Radiated) Immunity tests the presentation of the tests in the (logging) table is from first time stamp to last time stamp. The first time stamp is on the top of the table. The last time stamp is at the bottom of the table and only short visible during test. We want the opportunity to change ...

We find out when during an emission measurement an "IF overload" occured no emission data will be saved. Is this correct? It looks like that Radimation decides that this is an incorrect measurement and no data will be stored. In our measurement we had an "IF overload" because of an known transmitter...

Is it possible to make a printout (*.xls, *.pdf, *.png,*.word, . ...) of the logsheet of performed tests on an EUT.

For a RE multiband measurement (ED-14/DO-160) we are using several frequency subbands with different RBW, VBW settings. When plotting the table in a word document only one frequncy subband setting will be plotted with the "RBW"and "VBW" keywords. How can i plot also the settings of the other frequen...

We want to do a "Radiated Immunity Multiband" test with a calibrated field (substitution method).
Also we want to exclude some frequencies form the test. How to do this?

If possible a quick response, with need it this week !!!!!

Within a conducted or radiated emission measurement (multiband) it is possible to "copy graph to clipboard" or "copy graph to printer". For "copy graph to printer" a template *.doc ("printout" directory) will be used. Questions: 1. Is there a setting within Radimation to refer to another *.doc templ...

Thanks for the code. However it stills not working. The complete table is written to the generated report document. Attached two files: Template document as input for report generator: REmultiband.docx Generated report document: 6143301.4.1.1.docx Also during generation of the report the report gene...

Select a "Radiated Emission" *.tsf file for Excel Export. Run the tool, however get the message that the selected *.tsf file is currently not supported by excel export.
What could be wrong.

Via Radiated Emission > Graph > Export a graph can be exported as example to *.csv file format. You can only export one graph at a time. 1st question: Is it possible to export several graphs within one *.csv file (using two or more colums). 2nd question: "Max peak correction" is total correction of ...

Want to make a peak table with redused column information. The keyword "EMISSION TABLE" is working. Can't find the correct keywords to generate this table. What is wrong in the keywords beneath (see file attachment).

Performing a multiband radiated emission measurement in one run on several sub-bands (4) with different parameters (EUROCAE ED-14). Each sub-band takes 4001 points. During the run sometimes a "Radilog error" and "out of memory" error occurs. It looks that this error is related to the parameter "poin...

For each test it is possible to add tsf files directories to categorize per standard as example. Only in the "TSF_file" directory of Radimation these directories have a general name like "New Directory-x" ( x is a number from 1 to ....). Is it possible to re-name these directories to more specific n...

Hello John, The system calibration with RadiPower power sensor is now working, but still not satisfying. I have devided the last problems in two configurations: Config 1: calibration > system calibration/EUT calibration > attenuation / gain with IFR2023B generator and RadiPower RPR2006C power sensor...

Did some further investigation with two different laptops with the same hardware configuration for testing (IFR2023B and RadiCentre 1009B). It looks that the problem is the device driver for the RadiCentre. Both laptops have the same Radimation software version 2016.11.16, but different device drive...