RadiMation forum

Hello,

I would like to inform you that unfortunately we currently do not support a "Standard groups" functionality.

I hope to have informed you for now,

With kind regards,

Jeru

Currently it is not possible to use additional SQL queries on tests included by a test specific inclusion codes, such as ||EUT| ALL RADIATED EMISSION TESTS||, within a main template file. In the past we have received multiple wishes regarding implementing such functionality, where extra filtering is...

The references template files used when the print button above the graph is pressed are coded in software, it is currently thus not possible to change these references. It would however be possible to find the currently used template file in the "printout" directory and change the template according...

To perform a current limitation while regulating to a certain voltage, the "measured current limit" test level can be used. In Multi Band this test level is found under the "Test level configuration" and is of type Limit. this test level can be configured with a value for the current on which the li...

We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2021.1.8 version. This version 2021.1.9 has been validated by our internal software quality checks. We strongly advise to test a...

We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2021.1.7 version. This version 2021.1.8 has been validated by our internal software quality checks. We strongly advise to test a...

We have released an updated version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2020.2.9 version. This version 2020.2.10 has been validated by our internal software quality checks. We strongly advise to test ...

Hello, I can give you a heads up that we are currently working on the multiband absorbing clamp functionality ;) Using this functionality it will be possible to configure the clamp movement measurements to your requirements. This functionality shall become available in a t.b.d future RadiMation rele...

That is very good hear,

Based on your feedback, we have changed the image on the linked wiki page to now refer to the GPIB Interface ID instead of the primary adress.

Best regards,

Hello, From your error-report we found that RadiMation is expecting to connect on GPIB primary address 0. The board at address 0 however is not found, but we can see that something is found on address 1. We have updated our wiki page describing this specific error. https://wiki.radimation.com/wiki/i...

Hello, That is very unfortunate to hear, To investigate what is happening could you submit an error-report to us containing the "tried" communication which ended up in the error that you are experiencing? In the meantime, maybe a possible solution since addressing through NIMax does seem to work, is...

Hello,

By all devices specified in RadiMation do you mean: All devices added by users to a RadiMation installation to use for testing purposes,
or all devices possibly available in RadiMation which are yet to be added by users?

Best regards,
Jeru

If you want to add a CDN driver which is not found in the available drivers list for use in Conducted Immunity testing. You can add a new driver by hand, to do this follow the following steps: 1) go to Devices -> Configure -> Device Drivers. 2) Select Injection devices as the device driver type. 3) ...

If you want to add a CDN driver which is not found in the available drivers list. You can add a new driver by hand, to do this follow the following steps: 1) go to Devices -> Configure -> Device Drivers. 2) Select LISN as the device driver type. 3) Press add. 4) Search for the configurable LISN, and...

When the measurement time and step size controls are greyed out, it means that the analyzer defined in the test site is not used in Scanning receiver or Time domain mode. To have the measurement time and step size controls active, make sure you add either the Scanning receiver or Time domain version...

For the immunity testing modules there are a couple data view options Frequency view --> Shows the measurement data indexed on frequency. Time view --> Shows the measurement data indexed on time. Table view --> Show measured data within tables based on the last active view. The frequency view will o...

According to the standard that is used for testing different system calibration modules can be used. If testing is done for most CE and Automotive purposes: Calibration > System Calibration > Conducted Immunity can be used. For this type of calibration it is not possible to use an multi-meter as dev...

Currently there is no option available to attach correction files to a multi-meter. There is also no option to add a correction through a cable, as there is no such cable defined for multi-meter devices. by your request however, we can make a new ticket describing your mentioned functionality as a w...

RadiMation has recently added new functionality which makes it possible to generate reports from the command line. This new functionality is soon to be found in the upcoming RadiMation 2020.1.x release. See RadiMation 2020.1.x manual Chapter 14.6 Command Line Interface (CLI) for more information on ...