RadiMation forum

We have released an updated minor version of RadiMation software, which includes several new device drivers and some small fixes for problems that have been detected since the release of the 2015.1.8 version. We strongly advise to test and verify (according to your quality system) this and each new ...

We have released an updated minor version of RadiMation software, which includes several new device drivers and some small fixes for problems that have been detected since the release of the 2015.1.7 version. We strongly advise to test and verify (according to your quality system) this and each new ...

According to the manual of the Narda probe it is described how to correct the probe insertion loss at page 8: “The insertion loss of the probes is calibrated in a 50 ohm system over the frequency range of 9 kHz to 30 MHz. The only difference from PMM SHC-1 and PMM SHC-2 probes is the insertion loss ...

Today we released an updated minor version of RadiMation software, which includes several new device drivers and some small fixes for problems that have been detected since the release of the 2015.1.5 version. We strongly advise to test and verify (according to your quality system) this and each new...

Today we released an updated major version of RadiMation software, which includes several improvements and small fixes for problems that have been detected since the release of the 2014.2.10 version. We strongly advise to test and verify (according to your quality system) this and each new version o...

Your reports are now stored with reference to item #5872: Synchronisation with file is lost.
We have to investigate what can be the cause of this issue.
You will be informed about this process by automatic generated e-mail(s).

The setup of the LISN is up to the end-user. Depending on the setup the configuration matrix in RadiMation can be set.
As an example the end user has used Line 1 and Line 2 and connected these to the OUT 1 and OUT 3. The RadiMation configuration looks as the following:

This topic refers to item #5820: Very low forward power during CDN calibration.

Thank you for your question. On the moment you need to use the keyword ||OPERATING MODE||. This keyword is not yet described in the manual and we are aware that MODE OF OPERATION sounds much more logic for retrieving the data of this field. We have created an item (#5740) for this to investigate how...

First of all, welcome to our RadiMation forum and thanks for questioning this at this topic. Unfortunately, the generated graphs for the final report can't be modified by the end-user like you described in RadiMation. However, both descriptions are now saved as reported items (wishes) in our databas...

Hello Marius,

Thanks for making that clear to us. We will review and investigate this item a.s.ap.
As soon as we have more information we will directly inform you about it.

See also the related topic: viewtopic.php?f=5&t=491&p=984#p984

The amplifier protection will limit the power on the amplifier input and/or the forward power and/or on the reflected power based on the values being measured. This means that if no forward power meter is present during the test, no forward power protection of the amplifier can be performed. The sam...

Thank you both for your request for additional explanation for this test and settings. We have create an item for this with reference to #5708: RadiMation manual information for Logging, Envelope Tracing, Burst and all Measurement Settings. As soon as a solution becomes available we will inform you ...

Thank you for reporting this, we have saved this issue in our database with reference to item #5682: Tolerances of AD Channel are shifted after report generation.
We will contact you about this as soon as possible.

Thank you for your request for a new RadiMation device driver.
This is now saved in our database with reference to item #5680: Driver: Scope Gould Classic 9500 DSO as AD Convertor.
You will be personally contacted regarding this request.

STEP 1. Go to the download page: http://download.radimation.com STEP 2. Fill in the requested forms. Make sure to enter only valid information and e-mail address, as you will then receive an unique download code by e-mail. Step2_Fill in the requested forms_v2.PNG STEP 3. Click the button "Request"....

DARE!! Instruments has released a new version of the RadiMation software. I would like to update to this version. How can to obtain the setup.exe to be able to install it?

The first check box is to enable/disable the specific detector or trace in total. The second parameter is to be used to enable/disable these time parameters, which can configure the time constant and the the measurement time. These detector time settings are described in the manual: “In the detector...

This is indeed possible. In your RadiMation version (2014.1.15) already some Burst RG (Report Generator) keywords are working correctly. Due to the fact that we recently have made more information from the Radiated Emission Burst available as RG keywords, these ‘new’ RG keywords will only work from ...