Schwarzbeck FCVU Device Driver

Discussion and questions regarding the RadiMation device drivers that control the measurement equipment.
Post Reply
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hello,

is there a driver for the Schwarzbeck FCVU EMI Reveicer?

thanks in advance
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

Re: Schwarzbeck FCVU Device Driver

Post by joro »

Hello Steffen,

We currently do not have a device driver to control the Schwarzbeck FCVU 1534 EMI receiver.
(see: http://www.schwarzbeck.de/artikel.php?lang=1&kat=FM).

Based on the information on their website, Schwarzbeck describes that the FCVU does have a IEEE 488 interface, and that they have their own software to control/read-out the FCVU 1534 EMI Receiver. So technically it should be possible to create a device driver for this device.
However, currently we do not have the correct documentation regarding the remote control of the FCVU EMI receiver. That documentation is required before we can create a device driver. Do you have some documentation regarding the remote control of the FCVU?

With best regards,
John
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hello John,

At the moment, I don't have documents regarding to the remote control. But in the next days I will get informations.
When I send you the documents, is it possible to create a driver for the FCVU?

with best regards,
Steffen
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

Re: Schwarzbeck FCVU Device Driver

Post by joro »

Hello Steffen,

If you provide me with the remote-control documentation, we are able to create a device driver for it.
However we will not be able to test the correctness of this device driver because we do not have access to the device itself.
If you are willing to help us to test the new device driver, we can create the new device driver as a combined effort.

With best regards,
John
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hello John,

of course we will help you to test the driver device! When I have the documents, I will write you again.
You don't have your email address in your user profil. So, maybe you can write a email to me, that I have your email address, to send you the documents. My email is in my user profile.

thanks in advance!
Steffen
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

Re: Schwarzbeck FCVU Device Driver

Post by joro »

Hello Steffen,

If you have RadiMation specific questions that you want to discuss by e-mail, please send an email to: support@radimation.com

With best regards,
John
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Should I send the documents to support@radimation.com too?
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

Re: Schwarzbeck FCVU Device Driver

Post by joro »

Hello Steffen,

Yes, that is ok. You can send the documents to support@radimation.com

Best regards,
John
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hi John,

ok, i have sent you the documents, I received one hour ago from Schwarbeck.

Thanks in advance
Steffen
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

Re: Schwarzbeck FCVU Device Driver

Post by joro »

Hello Steffen,

We did receive the documentation and the example. I also read it, and I believe to understand how it should be controlled. (It is not a very common principle that is used, and it is a little bit cryptic ;) ).
Based on this information we can create a new device driver for the Schwarzbeck FCVU, however it is to estimate when this new device driver will be finished.

With best regards,
John
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hello John,

Is the driver for the Schwarzbeck already available?

kind regards from south germany
Steffen
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

Re: Schwarzbeck FCVU Device Driver

Post by joro »

Hello Steffen,

I'm sorry to say that the device driver for the FCVU is not yet available.

I will do my best to get it available.

With best regards,

John
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

many thanks in advance!
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hello John,

are there some news regarding the FCVU receiver?

best regards
Steffen
tha-paul
Posts: 56
Joined: 21 Jun 2012, 15:30

Re: Schwarzbeck FCVU Device Driver

Post by tha-paul »

Hi John,

are there some news regarding Schwarzbeck receiver?

thanks in advance!
Post Reply