The following issues are fixed in this 2014.1.5 version (compared to the 2014.1.2 version):
- #2513: Zoom-in factor for frequency detection of peaks > 100
- #4226: Wrong command PMM9030/ PMM9060 to set RBW
- #4255: Driver: strange VBW value is set
- #4703: Still test running or still documents loaded errors without any window opened
- #4776: Closing the 16 point result window using the top-right red cross, is not closing the document
- #5022: Innco CO3000 is started at 100cm instead of 90cm
- #5029: Innco CO3000 tolerance on the movement is not managed
- #5176: Unhandled exception during Uniform Field Area Calculation
- #5206: EUT Compression Calibration Unhandled Exception error
- #5229: Opening Mil Std Magnetic test data is generating an Unhandled exception
- #5231: Multiband Fixed power Unhandled exception Arithmetic operation resulted in an overflow error
- #5232: R&S HCC Not all bytes are written to the GPIB-Board within the timeout period (GPIB:EABO)
- #5270: Peak conservation setting is ignored
- #5290: Update the splash screen logo of EMV to ETS
- #5296: Unhandled Exception 'Object reference not set' for Emission X + k * S
- #5300: Unhandled Exception 'Object reference not set' for Climat Chamber
- #5328: Agilent Technologies N191A powermeter error
- #4638: Closing test configuration window will open test window
- #5042: Test is starting after closing it
- #5238: Test is opening unwanted windows after closing it
- #5265: Metrohm Turntable device driver
- #5313: Readout of SOPM01/03 is slower
- #4802: Magnetic Field method can't use TT and AT
- #4899: Peaks detection is not correct after initial sweeps and final peaks are not/wrong measured
- #5150: R&S SMA100A/SMC100A timeout while waiting for OPC command
- #5236: Cannot access a disposed object after closing RadiMation
- #5257: RM is not returning RTT1001B turntable controller motor error
- #5297: Unhandled Exception 'disposed object' for LISN and Merge
- #5299: R&S SMP02 Signal generator -222 Data out of range error
- #5303: RF Amplifier Impossible to get description string (..) Unknown RadiMation error
- #5308: R&S ESU8 timeout expired before OPC
- #5314: RadiMation database table and fields are somethimes not retained
- #5318: CAL file used by TSF is not easily visible
- #5331: ESVS10 performs two scans instead of one
- #5348: When auto trigger mode is selected for a VI Powermeter, it always remains in auto trigger mode
The complete list of release notes can be found on: http://wiki.dare.nl/wiki/index.php/Release_Notes_2014.1.
The new 2014.1.5 release of RadiMation can be downloaded from: http://shop.dare.nl/index.php?option=co ... &Itemid=54. (see: viewtopic.php?f=3&t=53 )