New version: RadiMation version 2016.1.4

This forum contains news and upcoming events regarding RadiMation
Post Reply
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

New version: RadiMation version 2016.1.4

Post by joro »

We have released an updated minor version of RadiMation software, which includes several new device drivers and some small fixes for problems that have been detected since the release of the 2016.1.3 version.
We strongly advise to test and verify (according to your quality system) this and each new version of RadiMation at for example a separate PC or laptop with your setup and with your measurement equipment, before you are going to use it for daily operation.

The following issues are fixed in this 2016.1.4 version (compared to the 2016.1.3 version):
  • #423: Configuration of customer database is not retained
  • #4809: Driver: Hameg HMS3010 Spectrum Analyser
  • #5211: Driver: Maturo NCD controller advanced error checking
  • #5228: HP8594E GPIB error
  • #5314: RadiMation database table and fields are sometimes not retained
  • #5492: System error checking on HP 8562/8563 causes communication errors
  • #5969: R&S ESU EMI receiver is only set to integer frequency values
  • #6175: Driver: Thermo Scientific EMCPro-PLUS
  • #6429: Peak Maximise settings change doesn't work
  • #6810: Driver: Lutron EMF-819 Fieldsensor
  • #6839: Forward power column in the table of Amplifier linearity is not showing the first powerlevel
  • #6871: Driver: Hameg HM8135
  • #6902: Keywords TEST SITE EMAIL ADDRESS and CLIENT EMAIL ADDRESS are not working anymore
  • #6957: Not possible to export a fixed field to a CAL file, errors is shown that modulation was used is shown while this is not the case
  • #7004: Pasting large data (19000 rows) into a COR file is crashing RadiMation
  • #7032: GPIB communication is slower with newer drivers
  • #7033: Unknown error message RadiField. Error 530
  • #7040: Marconi signal generator doesn't respond on *STB?
  • #7045: Cannot find Modulation source in the currently active testsite
  • #7052: Crash: CE MB Antenna Terminal measurements
  • #7056: 1st correction file selection of antenna shows: 'Select a correction file'
  • #7057: HP 8594E analyser as a power meter returns Not all bytes are written to the GPIB-Board
  • #7061: Graphs and table of Amplifier linearity test is unlogical
  • #7075: sorting of columns of the peak table is not working correctly
  • #7076: Exporting field strength to calibration is not working, because a modulation is selected, even if 'No Modulation' is selected
  • #7084: HP85xx-series: Incorrect measurement: Emission values up to 330 dBuV/m
  • #7086: Setup downloads .NET 4.6 instead of .NET 4.6.1
  • #7094: Bonn amplifier should be placed in REMOTE, also on GPIB
  • #7105: Unlogical Red cross in AD Configuration dialog
  • #7108: Selection of CapacitiveClamp on EMTest UCS500N not correct
  • #7113: Polar graph is not drawn correctly, when the window has been maximized
  • #7117: Driver TTi TGR2050 Synthesised RF Generator
  • #7119: RadiMation does not start up after modifying global/standalone directory
  • #7124: Object reference not set to an instance of an object: Frequency drawing of bands control
  • #7127: Font of the legend on the polar plot is much smaller than on the frequency graph
  • #7128: Index was outside the bounds of the array error 536879965
  • #7136: Unable to report error manually
  • #7138: Issue with our home made 40 channel AD Converter
  • #7141: AD Converter error during test initialization
  • #7145: Output of multiple channels using LeCroy WaveSurfer Channel switch matrix driver during single band test
The complete list of release notes can be found on: http://wiki.dare.nl/wiki/index.php/Release_Notes_2016.1.

The new 2016.1.4 release of RadiMation can be downloaded from the DARE!! web-site: Image

We always advise to thoroughly test EACH new RadiMation software version to determine if it works correctly in your situation with your equipment, before you use it for daily measurements. This is even a requirement for all ISO 17025 accredited test-labs. To enable customers to validate new software versions before they implement that new software version, we even made it possible to install multiple versions of RadiMation side-by-side on a single PC.
Post Reply