New version: RadiMation version 2016.1.7

This forum contains news and upcoming events regarding RadiMation
Post Reply
User avatar
sast
Posts: 168
Joined: 05 Sep 2012, 15:39
Contact:

New version: RadiMation version 2016.1.7

Post by sast »

We have released an updated minor version of RadiMation software, which includes several new device drivers and some small fixes for problems that have been detected since the release of the 2016.1.6 version.
We strongly advise to test and verify (according to your quality system) this and each new version of RadiMation at for example a separate PC or laptop with your setup and with your measurement equipment, before you are going to use it for daily operation.

The following issues are fixed in this 2016.1.7 version (compared to the 2016.1.6 version):
  • #4026: 10dB Min Attenuation is not switched OFF with the TDEMI
  • #4030: TDEMI controlled LISNs
  • #4828: Guide how to configure and use RG templates
  • #5600: RadiMation crash after Gauss TDEMI device driver check
  • #5886: Driver R&S SMR20 Signal Generator (with internal pulse modulation)
  • #6252: GAUSS Instruments TDEMI device firmware update now causes a timeout error after reset
  • #6382: EM TEST UCS 500 Surge generators not possible to configure the GPIB address
  • #6622: Driver: Different models for the Gaus Instruments TDEMI
  • #6630: Add RadiLog messages to the DeviceDriverBase class
  • #6647: RadiSense 6 fieldprobe connected by Radicentre 1 is raising an error
  • #6791: Driver RadiField 2000 series as EM Field generators
  • #6893: Add events when starting tests
  • #6910: Driver: TDEMI X6 Spectrum Analyser
  • #7037: Aplying modulation out of dwell time period gives odd peaks
  • #7038: Disabled modulation at frequency steps
  • #7063: Driver: Gauss TDEMI X
  • #7110: Closing of the virtual Field sensor measurement window
  • #7118: EM-Power 7002-006 powermeter Windows device drivers are not working
  • #7137: Does Minimum performance take the minimum and maximum of every AD channel into account?
  • #7181: Driver: euro EMC RSC
  • #7184: Timeout on checkdevice TDEMI X3
  • #7196: Driver: Amplifier Teseq CBA 3g-050
  • #7209: emtest PFS500 SRQ line of the GPIB bus is raised by another uncontrolled device.
  • #7224: AD convertor device trough MODBUS
  • #7225: AD Convertor using OPC to connected with CAN USB convertor of PEAK with CANopen protocol
  • #7290: RadiField RFS1006B Returns error: 574
  • #7296: Cant add the HP8594E as real power meter to the EUT file after installing the latest drivers
  • #7297: Check of a TDEMI is crashing if the device is not connected
  • #7300: Driver Schwarzbeck NNBM 8126G seems to not work properly
  • #7303: RadiField amplifier is not put into operate
  • #7319: Driver: emtest CWS500N1.3
  • #7336: EMTest EFT500
  • #7379: R&S NRP only channel a is working
  • #7382: Does RadiMation software use "Dwell for Combination of RF Immunity CW,AM,PM"
  • #7385: Driver: EMTest TSS 500
  • #7390: Connect button on the VI Amplifier window is not shown
  • #7392: Selecting a VI from the Devices menu shows a new VI window, even if the VI is already open
  • #7394: Update of the table of a graph, sets the selection to the first row again
  • #7402: RadiPower RPR3006W questions
  • #7405: Request Radimation driver for Rohde & Schwarz FSW-26 Signal Ananlyzer
  • #7447: Field Sensor FP5080 is returned unexpected values
The complete list of release notes can be found on: http://wiki.dare.nl/wiki/index.php/Release_Notes_2016.1.

The new 2016.1.7 release of RadiMation can be downloaded from the DARE!! web-site: Image

We always advise to thoroughly test EACH new RadiMation software version to determine if it works correctly in your situation with your equipment, before you use it for daily measurements. This is even a requirement for all ISO 17025 accredited test-labs. To enable customers to validate new software versions before they implement that new software version, we even made it possible to install multiple versions of RadiMation side-by-side on a single PC.
Post Reply