New version: RadiMation version 2018.2.5

This forum contains news and upcoming events regarding RadiMation
Post Reply
User avatar
joro
Posts: 440
Joined: 24 Aug 2011, 09:55
Contact:

New version: RadiMation version 2018.2.5

Post by joro »

We have released a new major version of the RadiMation software, which includes several improvements and fixes for problems that have been detected since the release of the 2018.1.5 version.
This version 2018.2.5 has been validated by our internal software quality checks. We strongly advise to test and verify (according to your quality system) this and each new version of RadiMation at for example a separate PC or laptop with your setup and with your measurement equipment, before you are going to use it for daily operation.

Download
The new 2018.2.5 release of RadiMation can now be downloaded from the DARE!! web-site. Image

We always advise to thoroughly test EACH new RadiMation software version to determine if it works correctly in your situation with your equipment, before you use it for daily measurements. This is even a requirement for all ISO 17025 accredited test-labs. To enable customers to validate new software versions before they implement that new software version, we even made it possible to install multiple versions of RadiMation side-by-side on a single PC. It is of course also possible to perform this validation on for example a separate PC or laptop.

Known issues
  • #9118: Ambient suppression in Multiband Emission GTEM causes that the GTEM correlation is not performed
If you have a problem or question, please do not hesitate to report it to us, so we can continue to improve RadiMation.

Fixed issues
The following issues are fixed in this 2018.2.5 version (compared to the 2018.1.5 version):
  • #8751: Renaming a test-level input in a multiband immunity test, removes the second, if they both have the same name.
  • #9055: Remote operation of the RadiLink is not always indicating error situations
  • #9324: ErrorReport: "Collection was modified; enumeration operation may not execute.
  • #9335: VI Window crash at closing
  • #9517: Keywords changed
  • #9591: Object reference not set to an instance of an object: ctlControlStop.CancelCommands(
  • #9604: Report Error does not handle polish characters
  • #9670: Auto stepsize of TDEMI is set to 5 kHz, even if 120 kHz RBW is selected
  • #9685: Attachments of the EUT File are corrupted
  • #9693: Add printout templates for CI Callibration and C Susceptibility
  • #9714: Deadlocking in clsDataIdentifiers.
  • #9717: Change menu order for Pulsed Imunnity tests.
  • #9742: Changing a sequence file does not work correctly.
  • #8381: Impossible to remove graph line from different test data when the file has been closed
  • #9572: Red dots as quasi peak markers
  • #7975: Communication interrupt during EFT test
  • #8041: Agilent 9038A as powermeter
  • #8221: RadiMation logo in graph is not shown first time a test is opened
  • #8280: Test equipment for EUT Calibration of Attenuation / Gain cannot be changed
  • #9679: Cannot find turntable in the currently active testsite.
  • #8263: Opening non existing file with RadiLog crash Gives exception
  • #9002: Also show the latest DRIVERS.EXE version on the RadiWiki Main page
  • #9115: Temp filenames in creating new files
  • #9202: Adding input fieldprobe without enabling any probe in RI MB test, is causing object reference
  • #9224: In ErrorReport an unknown label 'usr agr' is present
  • #9246: Script for copying latest RadiMation release to Radi-Products Production folder
  • #9300: How to show the points only that have the status 'fail'
  • #9301: ErrorReport: "ETS-Lindgren EMField 7008-005 FWD power: Parameter too low"
  • #9312: EMI reciver switch to spectrum analyzermode while initialisation for conducted emission testing
  • #9323: SystemCrash: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
  • #9333: ErrorReport: "Cannot find the device driver.
  • #9334: ErrorReport: "Startfrequenz ist zu niedrig fuer das gewaehlte Geraet"
  • #9340: Driver: Shaffner Broadband Horn Antenna 1-18 GHZ - BHA 9118
  • #9358: Radimation crashes when device is in use by other software
  • #9372: How to remote control LISN R&S ENV216 with the R&S ESW 26 via radimation
  • #9373: Rohde & Schwarz SMR 20 (ID7340): Specific System Error: 110,"Output unleveled"
  • #9389: How do we set-up for testing acording EN6100-3-2 and EN 61000-3-3
  • #9390: The file extensions of the template and the output document do not match
  • #5636: R&S ESPI 3 error Data out of range SCAN1:BAND:RES
  • #6351: How to configure the Monitoring input channel setup for the used AD Converter device driver
  • #6377: How to enable or customize the borders of the grid of the exported table information of the ||EQUIPMENT TABLE|| keyword
  • #6380: Would it be better to do fewer sweeps with a long sweep time or many sweeps with short sweep time?
  • #6392: How is the Monitoring input channel formula option used?
  • #8751: Renaming a test-level input in a multiband immunity test, removes the second, if they both have the same name.
  • #8760: The CheckDevice check for Amplifier Research amplifiers using the P0/P1 command set is always succesful
  • #8795: Driver: switch matrix: MCC USB-ERB24
  • #8797: Driver: Antenna tower controller HD GmbH IEEE488-16REL GPIB
  • #9055: Remote operation of the RadiLink is not always indicating error situations
  • #9142: Driver: Mini-Circuits PWR-6GHS
  • #9331: Radiated immunity RF on but not scanning
  • #9547: Schloeder CWG500 is waiting forever on a discharge trigger
  • #9551: Problem with ECU-6 Communication
  • #9559: RF Amplifier (ID1344): Prana returned a warning state.
  • #9575: Problems controlling the Keysight Technologies CXA (N9000B)
  • #9590: Index was outside the bounds of the array. clsDataIdentifiers.Add
  • #9591: Object reference not set to an instance of an object: ctlControlStop.CancelCommands(
  • #9604: Report Error does not handle polish characters
  • #9610: Driver: Amplifier VBA250-80
  • #9611: Driver: Clamp Schwarzbeck CVP 9222B
  • #9612: Driver: CDN FCC-801-M2-16
  • #9613: Driver: LISN - Rohde & Schwarz: ENY 41
  • #9614: Driver: Pulse Limiter - Rohde & Schwarz ESH3-Z2
  • #9615: Driver: LISN - Schwarzbeck CAT3 8158
  • #9617: Driver: Calibration Adapter FCC-801-150-50
  • #9647: Closing a device window crashes radimation - Exception has been thrown by the target of an invocation
  • #9673: Collection was modified; enumeration operation may not execute.
  • #9685: Attachments of the EUT File are corrupted
  • #9701: Driver: Keysight Technologies MXA N9020B + CXA N9000B
  • #9709: Driver: Schaffner SCR 3501
  • #9713: Communication time out RPR2006C
  • #9761: ErrorReport: "RBW switched to Auto(100kHz) during 30M-1G test
  • #9595: R&S ESI 40 GPIB randomly stops communication
If you have specific questions regarding on of the above items, please contact us at support@radimation.com

The complete list of release notes can be found on: http://wiki.dare.nl/wiki/index.php/Release_Notes_2018.2 .
Post Reply